Een ruime sortering rekstrookjes staat tot uw beschikking. De rekstrookjes van Feteris Components kunt u in iedere toepassing gebruiken waar rekstrookjes gevraagd worden.
Enkele typen uit ons rekstrook programma zijn: folie, draad, hoge temperatuur en lasbare rekstrookjes. Grote lijmkeuze voor alle materialen. Heeft u rekstrookjes nodig voor een R&D, sensor fabricage, monitoring of "custom made" applicatie? Wij kunnen u de juiste rekstrook bieden
| gauge series | applicable specimen | normal operational temperature range (°C) |
compensated temperature range (°C) |
description |
|---|---|---|---|---|
| General purpose integral lead wire foil gauge F series |
Metal Glass Ceramics |
-20 to +80 | +10 to +80 | A gauge with preattached lead wire |
| Polyester backing integral lead wire foil gauge PF series |
Metal Mortar |
-20 to +80 | +10 to +80 | A gauge with preattached lead wire |
| Polyester backing integral lead wire gauge P series |
Concrete Mortar |
-20 to +80 | +10 to +80 | A gauge with preattached lead wire |
| General purpose foil gauge F series |
Metal Glass Ceramics |
-20 to +80 | +10 to +80 | General purpose, stress concentration, torque, etc. |
| General purpose foil gauge UF series |
Metal Ceramics Composite |
-20 to +150 | +10 to +100 | Usable up to 150°C |
| Polyester backing foil gauge PF series |
Metal Mortar |
-20 to +80 | +10 to +80 | For metal and mortar |
| Polyester backing gauge P series |
Concrete Mortar |
-20 to +80 | +10 to +80 | For concrete and mortar |
| Waterproof gauge WF series |
Metal | 0 to +80 | +10 to +80 | Integral lead wire gauge with waterproof coating of epoxy resin |
| Temperature integrated gauge FLA-T series |
Metal Glass Ceramics |
-20 to +80 | +10 to +80 | Thermocouple is integrated. Simultaneous strain and temperature measurement using TML data logger. |
| Metal backing gauge FLM, WFLM series |
Concrete Mortar |
-20 to +80 | +10 to +80 | Used for concrete surface. WFLM is a waterproof type. |
| Magnetic field use MF series |
Metal Concrete |
-20 to +80 | --- | Available with twisted or shielded lead wire |
| Mold gauge PM series, PMF series |
Concrete Mortar |
-20 to +60 | --- | Embedded in concrete or mortar for loading test on concrete or mortar |
| Post-yield gauge YEF series ,YF series |
Metal | -20 to +80 | --- | Large strain measurement up to 10 to 20% |
| Foil gauge for wood and gypsum LF series |
Wood Gypsum |
-20 to +80 | +10 to +50 | Foil gauges for low elastic modulus materials |
| Wire gauge for wood and gypsum L series |
Wood Gypsum |
-20 to +50 | +10 to +50 | Having longer gauge length than that of LF series |
| Foil gauge for plastics GF series |
Plastics | -20 to +80 | +10 to +80 | Temperature compensated for acrylic or epoxy resin |
| Foil gauge for composite material BF series |
Composite material | -20 to +200 | +10 to +80 | For composite materials such as carbon glass fiber |
| Foil gauge for cryogenic temperature CF series |
Metal Ceramics |
-196 to +80 | -196 to +80 | Usable down to -196°C |
| Foil gauge for high temperature QF series |
Metal Ceramics |
-20 to +200 | +10 to +100 | Usable up to 200°C |
| Foil gauge for high temperature ZF series |
Metal Ceramics |
-20 to +300 | +10 to +100 | Usable up to 300°C |
| Stress gauge SF series |
Metal | -20 to +200 | +10 to +100 | Measures stress in the gauge axis directly |
| Weldable gauge AW series |
Metal | -196 to +650 | +10 to +600 | Installed by spot welding |
| Bolt gauge BTM |
Bolt M10 or larger | -10 to +80 | --- | Embedded in a pre-drilled hole of a bolt for axial strain measurement |
| Protected gauge FTP series |
Metal | -20 to +80 | +10 to +80 | Gauges with water and mechanical protection |
| One-side gauge DD series |
Metal | -10 to +70 | --- | Separated measurement of bending and axial strains of a plate |
| Crack gauge FAC series |
Metal | -20 to +80 | --- | Measures length of crack. Exclusive adapter is required. |
| Temperature gauge TF series |
All materials | -20 to +200 | --- | Installed in the same manner as a strain gauge and used for temperature measurement |