Edge control, positioning, tilt, centering
| Calibrating robot axes |
 |
During setting up and also at regular intervals within the scope of quality assurance, the robot axes must be adjusted. The measurement probes are mounted on the robot axes and acquire the zero point during the axis rotation using a probe tip. The integral electronics evaluates the probe signal and supplies a switching signal to the robot controller.
Product/sensor |
| Measurement system for cut packaging pieces |
 |
The cut pieces of packaging are placed in a measurement system. A non-contacting triangulation sensor scans the surface to measure the topography of the cardboard and to determine the line of the grooves, edges and the associated lengths to high accuracy. The results are documented and provide a means of correcting the production process at any time.
Product/sensor |
| Release of satellites into space |
 |
In order to be able to launch a satellite from the Areane rocket unobstructed into space, the nose cone section, together with the side shield, have to be separated from the main rocket immediately before the release of the satellite. Simultaneous and controlled activation of a series of pre loaded springs, provide the propulsion force for the separation of the nose cone and side shield. It is of vital importance that the section separates itself in an absloute linear motion from the main rocket. The separation movement is controlled by 3 Draw-wire Sensors.
Product/sensor |
If you can’t find your required application or have special requirements that are not listed here, please contact us.
|
