This gauge is designed for successful strain measurement on the concrete surface. It has a thin stainless-steel backing which prevents the penetration of moisture from the reverse side. It provides good electrical insulation to the concrete surface. The WFLM gauge has a moistureproof overcoating and integral lead in addition to stainless-steel backing. Stable measurement can be achieved by bonding the gauge with PS adhesive.
| Main Test Materials |
Concrete
Mortar |
Materials Backing |
Stainless steel |
| Operating Temperature |
-20 to +80°C |
Materials Element |
Ni-Cr alloy foil |
| Compensation range |
+10 to +80°C |
Strain limit |
0.5%
(5000×10-6) |
| Bonding adhesive |
PS |
Fatigue life at room temp. |
1×105
(±1000×10-6) |
Single element(G.F. 2.0 approx.)
| Type |
Gauge
length
(mm) |
Gauge
width
(mm) |
Backing
length
(mm) |
Backing
width
(mm) |
Backing
thickness
(mm) |
Resistance
(Ω) |
| FLM-30-11 |
30 |
0.5 |
60 |
18 |
0.12 |
120 |
| FLM-60-11 |
60 |
0.7 |
90 |
18 |
0.12 |
120 |
[ Waterproof Type ]
Single element(G.F. 2.0 approx.)
- 0.09mm23-wire paralleled Polythylene leadwire pre-attached
Total resistance per meter : 0.4(Ω)
- Lead wire length : 3-wire paralleled Polyethylene lead wire of 2m long
| Type |
Gauge
length
(mm) |
Gauge
width
(mm) |
Backing
length
(mm) |
Backing
width
(mm) |
Backing
thickness
(mm) |
Resistance
(Ω) |
| WFLM-30-11-2LT |
30 |
0.5 |
60 |
18 |
4 |
120 |
| WFLM-60-11-2LT |
60 |
0.7 |
90 |
18 |
4 |
120 |
|
